Aquaflex KS-988A JS acrylic polymer cemnetitious waterproof coating
- Implementation standards：
Aquacoat KS-988A JS acrylic polymer cementitious waterproof coating is made up by acrylate emulsion, cement and inorganic materials, typeⅠ and type Ⅱ are available according to their different performance.
1.It has environment friendly, non-toxic, harmless and safe performance.
High bonding strength, it can be bonded firmly with many types of mortar substrate.
2.Can be applied on wet and dry substrate directly
3.Good performance of flexibility, waterproof and durability
4.Can be applied on vertical, slope and top surface directly, no flow, easy to use
5.Good weatherability, it can be applied on the outdoor roof without special protective layer (normal protective layer is needed)
WHERE TO USE
Type Ⅰ is suitable for dry and non long-term immersion environment, e.g. Roof and so on.
Type Ⅱ is suitable for long-term immersion environment, such as washroom and underground construction.
Type Ⅲ is suitable for kitchen and washing room、pool、swimming pool and interior,indoor wall.
Ⅰ MODE: 20KGS LIQUID + 24KGS POWDER
Ⅱ MODE: 20KGS LIQUID + 30KGS POWDER
Ⅲ MODE: 20KGS LIQUID + 30KGS POWDER
the usage for 1.0mmthickness coating is about 1.3-1.5kgs/square meter
DATE BASE IMPLEMENTED STANDARD: GB/T23445-2009
Tensile strength Mpa ≥
Elongation at break ≥
Bending resistance at low temperature °C ≤
-10°C no gash
Imperviousness 0.3Mpa, 30 min
Solids content % ≥
Unpermeability Mpa ≥
Impermeability( Mortar dorsal surface)2) Mpa ≥