Location:Home > Construction > COATING
COATING

KS-101 CAPILLARY CRYSTALLINE WATERPROOF COATING

      Specifications:
  • 25KGS/BUCKET
      Implementation standards:
  • GB18445-2012
      Views:
  • Frequency
      Downloads:
Product Description
KS-101 Capillary crystalline waterproof coating is a cement base waterproof material produced by the American imported equipment and raw materials. KS-101 is made of silicate cement, composed of the special treatment of a group of active compounds and quartz sand powder materials.KS-101 contents chemical active substances which penetrate to concrete internal capillary channels through carrier, and react with free lime and water molecules , then forming crystallization which is insoluble in water . the crystallization can penetration into deep layer of the concrete , filling the pores and gap, at the end permanently stay in the concrete, densify the concrete, prevent water infiltration channel, thus permanently sealed the concrete. 

Product features
1.Can be constructed on the surface of the concrete structure and the surface which is faced the water;
2.Especially suitable for wet base construction;
3.Permanent active, can naturally heal the cracks below 0.4mm;
4. prevent corrosion of steel;
5.Protect concrete structures from waste water, sea water, chemicals and solvents;
6.Strengthen the strength of the concrete structure, prevent the destruction of concrete;
7.Due to its unique permeability, no protective layer should be set after construction;
8.Non-toxic, harmless, can be used for drinking water on the concrete structure;
9.Easy to use, simple operation, no construction joints.


Where to use
1.Water proof and anti seepage treatment for swimming pool, drinking water pool, sewage tank, marine aquarium, dam, reservoir and so on.
2.For the waterproof and seepage prevention of water immersion environment, such as basement, underground water channel, elevator well, balcony, toilet, etc..
3.Bridge , tunnel, stadium, nuclear power plant, military facilities, municipal engineering and pile head treatment.

Specification
Packing specification:25KGS/BUCKET
Recommend usage
the usage for 1.0mmthickness coating is about 1.5kgs/square meter
ITEMINDEX
III
StabilityPassed
Setting timeInitial settingtime,min ≥20
Final setting time,h ≤24
Anti-fold strength,MPa ≥7d2.80
28d3.50
Anti-pressure strength,Mpa ≥7d12.0
28d18.0
The strength of adhesive with wet construction base ,MPa≥1.0
 Peak Anti-leaking strength(28d),MPa≥0.81.2
Secondary anti-leaking strength(56d),MPa≥0.60.8
Leakage pressure,(28d),% ≥200300
Construction
MEMBRANE
COATING
HDPE Drainage Board
PLADEN Metal roof
Waterproof system
Household
Waterproof coating
Ceramic adhesive series
Tile grout series
Water resistance putty series
Other auxiliary materials
Repairing
ZT-SERIES
Solution
About Us
About Us
Corporate Culture
Production base
Honors
Strategic Alliance
College
Service Support
Technical Papers
Product Authenticity check
Construction Technology
Download
E-zine
Media Center
News
Industry Buzz
Video
Dealer dynamic
Information
Classical Projects
Major national projects
Railways, tunnels, airport pro
Municipal Engineering
Real estate project
Civil engineering
Join us
Talent Concept
Campus Recruiting
Social recruitment
Contact us
Contact
Feedback