In waterproof to 1 + 1 is our company introduces the waterproofing material at home and abroad advanced technology, independent research and development of a new generation of environmental protection is waterproof coating. The product with high elastic emulsion prepared with a variety of polymer additives and become, as long as according to certain proportion during the construction of mixed with cement can be used in any way. A combination of organic materials and inorganic materials of elasticity good durability advantages, after coating can form high elastic high-strength waterproof coating.
Exterior wall, hutch defends, waterproof and moistureproof processing pool, swimming pool, etc
Suitable for activity smaller at the grass-roots level
1. Easy to use, as long as the mixture with cement in a certain proportion is used;
2. It has excellent permeability resistance, crack resistance, water resistance and durability.
3. Has good flexibility;
4. Can be in damp base surface construction;
5. Can be directly put adornment layer in the drill on the waterproof layer;
6. Non-toxic water-based environmentally friendly products.
1. The base surface treatment: base should level off, without empty drum, remove all dust, oil stains, dirt and other loose materials. Apparent porosity, sand holes, cracks prior to repair, make circle arc Angle of inside and outside. New construction of concrete or cement mortar base rear can construction must achieve the maintenance period. If the temperature is high and base surface is relatively dry, humid construction before application of water base to without water shall prevail;
2. Coating ratio: according to【latex: cement = 1:1 】on the weight of the compound, can be used with electric mixer mixing evenly;
3. Construction: to make good waterproof paint besmear equably on the base of general brushing 2-3 times, meet the design requirements of the thickness of each time interval before the non-stick coating again hand shall prevail (about 2-3 hours), and each brushing with a coating on the vertical direction;
4. The waterproof layer to enhance processing: can use glass fiber cloth or nonwoven for tire body enhancemen
Technical Data Sheet
|≥ 70||≥ 70|
Tensile strength ，Mpa
|≥ 1.8||≥ 1.8|
Elongation at break，%
|≥ 80||≥ 30|
Adhesive strength ，Mpa
|≥ 0.7||≥ 1.0|
Permeability resistance(back surface of mortar)，MPa
|≥ 0.6||≥ 0.8|
1. Use the cement of 32.5 R ordinary Portland cement (or more than 32.5 R grade cement);
2. Configuration good waterproof coating to one-off exhausted, expire date;
3. Waterproof layer completely dry (about 7 days) to do after solid other downstream operations;
4. Construction temperature is not less than 5 ℃.
Dosage of reference
1.0 Kg / ㎡ / mm
Transportation and Storage
1. This product is not flammable and explosive materials, according to general cargo transportation, should prevent insolation, cold;
2. 5 to 40 ℃ storage temperature;
3. The shelf life of 12 months.
5 kg/barrel, 20 kg/barrel