Where to use
Building indoor cement mortar, concrete walls and ceiling of greasy leveling before coating.
1. The antibacterial mouldproof, waterproof breathable, stay dry wall;
2. Mutual affinity, strong cohesive force;
3. Ageing resistance, ensure finish lasting;
4. The surface is smooth, save the surface coating;
5. Non-toxic, no radiation, environmental protection products.
【 Base level requirements】
The construction surface should be clean, strong, without oily be soiled, stains and other loose materials. If it is plywood and wood wood base, brush again interface agent before the blow be bored with, construction after drying.
【 Stirring and mixing】
Add water into the container first, and then add the powder in proportion, with an electric mixer at the same time into uniform no grain of paste, let stand for 5 minutes and make a little stir again can use.
Water: powder = (7.6 8) kg: 20 kg
【Construction and maintenance 】
1. Stir with scraper will good putty with the base surface, and then erased, wipe scraping commonly 2 ~ 3 times;
2. The construction of every times the thickness of 0.5 ~ 1 mm (more than the thickness should be stratified batch), two times construction time interval about 2 ~ 4 hours (depends on the weather);
3. The last time of be bored with child after scraping, stay works 7 eighty percent (to touch not glue the hand), available scraper pressure light processing;
4. After completion of construction, suggest using 1 ~ 2 days more than 600 mesh fine sand paper, will leave a mark or uneven of the construction of the sand, the metope after grinding dust clean;
5. The scraping putty layer can be carried out after proper water curing, can accelerate the alkali subsided, 3 ~ 7 days later when the PH value in meeting the requirements of the coating, can besmear brushs a variety of coatings.
1. This product is suitable for use in 5 to 40 ℃ environment;
2. Not in the rain under the condition of construction;
3. Stir well be bored with child should be finished in 3 hours, shall be maintained during intermittent stirring;
4. Avoid by all means will have hard putty water mixed with;
5. During the renovation of the old paint surface should be the old paint surface to remove old putty layer and confirmed to be strong strong.
Dosage of Reference
1.3 kg / ㎡ / mm (surface roughness, can affect the dosage)
Packaging and Storage
Store in a cool and dry place, not unsealed product can save up to 12 months.
Specification: 20 kg/bag