Location:Home > Household > Ceramic adhesive series
Ceramic adhesive series

E-T3 polished tile/microlite/vitrified glue

      Specifications:
  • 20 kg/bag
      Implementation standards:
      Views:
  • Frequency
      Downloads:
Product Description

Where to use

1.suitable for the size less than or equal to 400 x 800 ceramic tile in the indoor and outdoor concrete or cement mortar wall body or vertical paste, high-level exterior wall should be chosen Elokt strong ceramic tile adhesive.

2.Apply to pave any floor tile

 

Product Features

1. Single-part product , add water gently used, construction is simple;

2. Strong cohesive force, low shrinkage rate, reduce caused by shrinkage crack;

3. Don't soak wet brick wall during construction, convenient and quick, improve work efficiency;

4. Non-toxic, no radiation, environmental protection products.


 

Construction Technology

【Base level requirements】

Base level should level off, clean, strong, no dust, grease and dirt, and other loose materials.

【Stirring and mixing】

1. The water poured into the container first, and then add the powder in proportion, with 

an electric mixer to form a fully agglomerate, uniform paste, let stand for about 5 minutes

 to make a little stir again can use.

2. The proportions【water: powder = (4.8 5.2) kg: 20 kg.】

 【Construction technology】

In tooth type scraping board will stir good ceramic tile adhesive batch of base surface, 

uniform distribution, and into strips dentate, each batch of about 1 ㎡ daub, then rubbing

 on the pressure in the ceramic tile;

2. If ceramic tile has a deep groove on the back or deep concave lines, in addition to the

 base level with ceramic tile adhesive, but should also in ceramic tile with adhesive on the back.

 

 

Technical Data Sheet

 

  Tensile adhesive strength                  

≥ 0.5 MPa

  After flooding tensile adhesive strength             

≥ 0.5 MPa

Hot tensile adhesive strength after the cold                  

≥ 0.5 MPa

After freezing and thawing cycle tensile adhesive strength            

≥ 0.5 MPa

 Open assembly time ,20min tensille adhesive strength                  

≥ 0.5 MPa

 

Dosage of reference

With 3 mm * 3 mm tooth type scraper, 1.8 kg / ㎡ (in the case of base level)

With 6 mm x 6 mm tooth type scraper, about 3.0 kg / ㎡ (in the case of base level)

With 10 mm x 10 mm tooth type scraper, about 4.6 kg / ㎡ (in the case of base level)

 

Matters Attention

1. 24 hours after completion of construction shall be entered or caulking;

2. This product is suitable for use in 5 to 40 ℃ environment. It is forbidden to have

 mucilage water mixing with stem node.

 

Health and safety

This product is alkaline, should avoid contact with the skin for a long time to avoid a large

 number of inhalation of dust and pay attention to eye protection, the eyes, please rinse

 immediately with plenty of water and see the doctor as soon as possible.

 

Product Color

White, gray

 

Packaging and Storage 

1. 20 kg/bag;

2. Should be stored in a cool and dry place, pay attention to moisture;

3. Not unsealed product, shelf life 12 months

 

Construction
MEMBRANE
COATING
HDPE Drainage Board
PLADEN Metal roof
Waterproof system
Household
Waterproof coating
Ceramic adhesive series
Tile grout series
Water resistance putty series
Other auxiliary materials
Repairing
ZT-SERIES
Solution
About Us
About Us
Corporate Culture
Production base
Honors
Strategic Alliance
College
Service Support
Technical Papers
Product Authenticity check
Construction Technology
Download
E-zine
Media Center
News
Industry Buzz
Video
Dealer dynamic
Information
Classical Projects
Major national projects
Railways, tunnels, airport pro
Municipal Engineering
Real estate project
Civil engineering
Join us
Talent Concept
Campus Recruiting
Social recruitment
Contact us
Contact
Feedback