Location:Home > Household > Ceramic adhesive series
Ceramic adhesive series

E-T6 polishing brick/microlite/vitrified brick tile adhesive

      Specifications:
  • 20 kg/bag
      Implementation standards:
      Views:
  • Frequency
      Downloads:
Product Description

Product Features

Strong cohesive force, flexibility is good, has the drop resistance, good water resistance and aging resistance, non-toxic environmental protection.

 

Where to use

Mainly used for external walls, ground paste large ceramic tile, marble, granite, etc.

 

Construction Technology

【Base level demands】

Base should be firm, smooth, dry, clean, no oil, wax stains, concrete curing agent and other loose objects.

【Stirring and mixing】

1. The water poured into the container first, and then add the powder in proportion, with an electric mixer to form a fully agglomerate, uniform paste, if let stand for 5-10 minutes and then paste mixing use 1 to 2 minutes, the effect is much better.

2. The proportion【 water: powder = (6 -) 6.5 kg: 25 kg.】

【Construction technology  】

1.In tooth type scraper paste and apply to the work surface, uniform distribution and into strips dentate, each about 1 ㎡ daub, then rubbing on the pressure in the ceramic tile;

2. Such as ceramic tile on the back of the groove is deeper, in addition to with ceramic tile adhesive on the surface of the work, but should also in ceramic tile with adhesive on the back.

 

Technical Data Sheet

                                    Index  ( Conform to the national industry standard JC/T547-2005 C2ET technical requirements)

  Tensile adhesive strength

 ≥ 1.0 MPa

 After flooding tensile adhesive strength

 ≥ 1.0 MPa

Hot tensile adhesive strength after the cold     

 ≥ 1.0 MPa

After freezing and thawing cycle tensile adhesive strength          

 ≥ 1.0 MPa

 Open assembly time ,30min, Tensile adhesive strength

≥ 0.5 MPa
Slippage≥ 0.5 mm

 

Dosage of Reference

With 3 mm * 3 mm tooth type scraper, 1.8 kg / ㎡ (in the case of base level)

With 6 mm x 6 mm tooth type scraper, about 3.0 kg / ㎡ (in the case of base level)

With 10 mm x 10 mm tooth type scraper, about 4.6 kg / ㎡ (in the case of base level)

 

Matters Attention

1. This product is suitable for use in 5 to 40 ℃ environment, avoid by all means mix has been hard of slurry water reuse;

2. Before construction must first confirm that the material end verticality and flatness, the shop is stuck to complete after 24 hours, before entering or caulking.

 

 

Product Color

Gray, white

 

 

Packaging and Storage 

This product is 20 kg/bag, should be stored in a cool, dry place, not unsealed product can be kept up to 12 months.

 

 

Construction
MEMBRANE
COATING
HDPE Drainage Board
PLADEN Metal roof
Waterproof system
Household
Waterproof coating
Ceramic adhesive series
Tile grout series
Water resistance putty series
Other auxiliary materials
Repairing
ZT-SERIES
Solution
About Us
About Us
Corporate Culture
Production base
Honors
Strategic Alliance
College
Service Support
Technical Papers
Product Authenticity check
Construction Technology
Download
E-zine
Media Center
News
Industry Buzz
Video
Dealer dynamic
Information
Classical Projects
Major national projects
Railways, tunnels, airport pro
Municipal Engineering
Real estate project
Civil engineering
Join us
Talent Concept
Campus Recruiting
Social recruitment
Contact us
Contact
Feedback